4.51 RTA

169,90 Tasse incluse

Out of stock

SKU: AF-4.51RTA Category:

“4⋅51”

the big brother of the 4⋅32 RDTA has arrived,

Made in Italy

TECHNICAL SPECIFICATIONS

  • MTL RTA atomizer
  • Entirely built in 316L stainless steel (PEEK insulators and polished PMMA tank)
    VR Drip tip | 15-10 included
  • Tank capacity: 4.51ml
  • Dimensions: 22 × 56 mm
  • Empty weight: 50g
  • Air adjustment ring with holes of:

1 – 1.2 – 1.4 – 1.6 – 1.8 – 2 (mm)

  • Standard sub-coil air with 3 holes of 0.8 offset with respect to the resistance
  • Double independent “regulation” of the liquid (ON-OFF and liquid regulation through 4 holes)
  • Immediate access to the deck and regenerable with full tank without losses.
  • Special processing on the bottom of the Deck designed to feed always and in any case even with bad regenerations (pressed or badly made cotton)
  • Orbital adjustment of the air flow through an internal ring nut such as the 4.32 RDTA. By continuing to rotate the toothed ring after reaching the limit switch, the internal one will also rotate, to orient all the air holes on 360 degrees.
  • Hypoallergenic internal air filter that silences the shot and reduces the turbulence of the intake air, creating a pleasant contrast even with the largest holes, washable even when the tank is full.
  • Convenient and quick disassembly and cleaning, the upper part as well as the lower one has only 3 pieces and a single action to disassemble it.
  • Interchangeable internal bell “4.32 Style” with dedicated tool / coiljig.
  • Refill from the top on O-rings (no thread that puts pressure on the tank) with 3.5 mm hole also compatible with glass pipettes.

THE CONTENTS OF THE BOX

  • 1x “4.51” RTA with polished PMMA tank and standard mounted bell
  • 1x Top Cap Naked
  • 1x Dark Bell
  • 1x Flat Bell
  • 1x Bells Tool / coil-jig with interchangeable and mountable 2.75-2.5-2.25-2 mm tips
  • 1x Spare Parts